Wisconsin Well Data › Lafayette County › Darlington (53530)
Darlington, WI (53530): well depth, water level & drilling cost
✓ 795 WI DNR records · Lafayette County
Pull every recorded well near a Darlington (53530) address — $49
How deep are wells in and around Darlington (53530), Wisconsin?
The median drilled well depth in and around Darlington (53530) is 230 ft, based on 416 wells with recorded depths in the state WI DNR database. Half fall between 190 ft and 260 ft; 90% are shallower than 290 ft.
How much does it cost to drill a well in and around Darlington (53530)?
Applying published per-foot rates to the local median depth of 230 ft: drilling and casing alone typically runs $5,750–$14,950; a complete system including pump, pressure tank, and hookup typically runs $13,800–$23,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Darlington (53530)?
The median static water level is 126 ft below ground surface (middle half of wells: 81 ft–150 ft), from 411 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lafayette County.
Part of Lafayette County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.