⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dane County › Deforest (53532)

Deforest, WI (53532): well depth, water level & drilling cost

✓ 381 WI DNR records · Dane County

148 ftmedian well depth
126 ft–177 fttypical depth range
41 ftmedian static water level
20 gpmmedian yield (137 tests)

Pull every recorded well near a Deforest (53532) address — $49

How deep are wells in and around Deforest (53532), Wisconsin?

The median drilled well depth in and around Deforest (53532) is 148 ft, based on 141 wells with recorded depths in the state WI DNR database. Half fall between 126 ft and 177 ft; 90% are shallower than 220 ft.

How much does it cost to drill a well in and around Deforest (53532)?

Applying published per-foot rates to the local median depth of 148 ft: drilling and casing alone typically runs $3,700–$9,620; a complete system including pump, pressure tank, and hookup typically runs $8,880–$14,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Deforest (53532)?

The median static water level is 41 ft below ground surface (middle half of wells: 29 ft–67 ft), from 140 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 3 100–150 ft 71 150–200 ft 41 200–300 ft 24 300–400 ft 1 400–600 ft 0 600+ ft 1
Looking at a specific property in Deforest (53532)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Deforest (53532)

Free. Goes to licensed drillers working Dane County.

Part of Dane County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.