⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Iowa County › Dodgeville (53533)

Dodgeville, WI (53533): well depth, water level & drilling cost

✓ 248 WI DNR records · Iowa County

225 ftmedian well depth
176 ft–275 fttypical depth range
125 ftmedian static water level
18 gpmmedian yield (129 tests)

Pull every recorded well near a Dodgeville (53533) address — $49

How deep are wells in and around Dodgeville (53533), Wisconsin?

The median drilled well depth in and around Dodgeville (53533) is 225 ft, based on 167 wells with recorded depths in the state WI DNR database. Half fall between 176 ft and 275 ft; 90% are shallower than 320 ft.

How much does it cost to drill a well in and around Dodgeville (53533)?

Applying published per-foot rates to the local median depth of 225 ft: drilling and casing alone typically runs $5,625–$14,625; a complete system including pump, pressure tank, and hookup typically runs $13,500–$22,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dodgeville (53533)?

The median static water level is 125 ft below ground surface (middle half of wells: 66 ft–168 ft), from 130 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 0 100–150 ft 27 150–200 ft 30 200–300 ft 80 300–400 ft 25 400–600 ft 4 600+ ft 1
Looking at a specific property in Dodgeville (53533)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dodgeville (53533)

Free. Goes to licensed drillers working Iowa County.

Part of Iowa County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.