⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Iowa County › Edmund (53535)

Edmund, WI (53535): well depth, water level & drilling cost

✓ 260 WI DNR records · Iowa County

256 ftmedian well depth
158 ft–305 fttypical depth range
174 ftmedian static water level
20 gpmmedian yield (86 tests)

Pull every recorded well near a Edmund (53535) address — $49

How deep are wells in and around Edmund (53535), Wisconsin?

The median drilled well depth in and around Edmund (53535) is 256 ft, based on 156 wells with recorded depths in the state WI DNR database. Half fall between 158 ft and 305 ft; 90% are shallower than 392 ft.

How much does it cost to drill a well in and around Edmund (53535)?

Applying published per-foot rates to the local median depth of 256 ft: drilling and casing alone typically runs $6,400–$16,640; a complete system including pump, pressure tank, and hookup typically runs $15,360–$25,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Edmund (53535)?

The median static water level is 174 ft below ground surface (middle half of wells: 94 ft–209 ft), from 86 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 6 100–150 ft 31 150–200 ft 12 200–300 ft 56 300–400 ft 36 400–600 ft 14 600+ ft 1
Looking at a specific property in Edmund (53535)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Edmund (53535)

Free. Goes to licensed drillers working Iowa County.

Part of Iowa County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.