⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Rock County › Hanover (53542)

Hanover, WI (53542): well depth, water level & drilling cost

✓ 249 WI DNR records · Rock County

140 ftmedian well depth
120 ft–180 fttypical depth range
50 ftmedian static water level
20 gpmmedian yield (103 tests)

Pull every recorded well near a Hanover (53542) address — $49

How deep are wells in and around Hanover (53542), Wisconsin?

The median drilled well depth in and around Hanover (53542) is 140 ft, based on 103 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 180 ft; 90% are shallower than 204 ft.

How much does it cost to drill a well in and around Hanover (53542)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hanover (53542)?

The median static water level is 50 ft below ground surface (middle half of wells: 30 ft–80 ft), from 103 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 7 100–150 ft 53 150–200 ft 24 200–300 ft 18 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Hanover (53542)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hanover (53542)

Free. Goes to licensed drillers working Rock County.

Part of Rock County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.