⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Iowa County › Hollandale (53544)

Hollandale, WI (53544): well depth, water level & drilling cost

✓ 578 WI DNR records · Iowa County

220 ftmedian well depth
166 ft–262 fttypical depth range
115 ftmedian static water level
20 gpmmedian yield (314 tests)

Pull every recorded well near a Hollandale (53544) address — $49

How deep are wells in and around Hollandale (53544), Wisconsin?

The median drilled well depth in and around Hollandale (53544) is 220 ft, based on 403 wells with recorded depths in the state WI DNR database. Half fall between 166 ft and 262 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Hollandale (53544)?

Applying published per-foot rates to the local median depth of 220 ft: drilling and casing alone typically runs $5,500–$14,300; a complete system including pump, pressure tank, and hookup typically runs $13,200–$22,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hollandale (53544)?

The median static water level is 115 ft below ground surface (middle half of wells: 60 ft–150 ft), from 316 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 8 100–150 ft 63 150–200 ft 76 200–300 ft 209 300–400 ft 41 400–600 ft 2 600+ ft 1
Looking at a specific property in Hollandale (53544)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hollandale (53544)

Free. Goes to licensed drillers working Iowa County.

Part of Iowa County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.