⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Jefferson County › Jefferson (53549)

Jefferson, WI (53549): well depth, water level & drilling cost

✓ 634 WI DNR records · Jefferson County

153 ftmedian well depth
123 ft–197 fttypical depth range
28 ftmedian static water level
20 gpmmedian yield (245 tests)

Pull every recorded well near a Jefferson (53549) address — $49

How deep are wells in and around Jefferson (53549), Wisconsin?

The median drilled well depth in and around Jefferson (53549) is 153 ft, based on 253 wells with recorded depths in the state WI DNR database. Half fall between 123 ft and 197 ft; 90% are shallower than 245 ft.

How much does it cost to drill a well in and around Jefferson (53549)?

Applying published per-foot rates to the local median depth of 153 ft: drilling and casing alone typically runs $3,825–$9,945; a complete system including pump, pressure tank, and hookup typically runs $9,180–$15,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Jefferson (53549)?

The median static water level is 28 ft below ground surface (middle half of wells: 15 ft–45 ft), from 250 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 25 100–150 ft 94 150–200 ft 68 200–300 ft 53 300–400 ft 5 400–600 ft 2 600+ ft 2
Looking at a specific property in Jefferson (53549)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Jefferson (53549)

Free. Goes to licensed drillers working Jefferson County.

Part of Jefferson County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.