⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Iowa County › Linden (53553)

Linden, WI (53553): well depth, water level & drilling cost

✓ 190 WI DNR records · Iowa County

234 ftmedian well depth
151 ft–280 fttypical depth range
140 ftmedian static water level
20 gpmmedian yield (96 tests)

Pull every recorded well near a Linden (53553) address — $49

How deep are wells in and around Linden (53553), Wisconsin?

The median drilled well depth in and around Linden (53553) is 234 ft, based on 133 wells with recorded depths in the state WI DNR database. Half fall between 151 ft and 280 ft; 90% are shallower than 318 ft.

How much does it cost to drill a well in and around Linden (53553)?

Applying published per-foot rates to the local median depth of 234 ft: drilling and casing alone typically runs $5,850–$15,210; a complete system including pump, pressure tank, and hookup typically runs $14,040–$23,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Linden (53553)?

The median static water level is 140 ft below ground surface (middle half of wells: 93 ft–160 ft), from 97 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 7 100–150 ft 24 150–200 ft 16 200–300 ft 62 300–400 ft 23 400–600 ft 0 600+ ft 1
Looking at a specific property in Linden (53553)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Linden (53553)

Free. Goes to licensed drillers working Iowa County.

Part of Iowa County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.