⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dane County › Mc Farland (53558)

Mc Farland, WI (53558): well depth, water level & drilling cost

✓ 1,570 WI DNR records · Dane County

143 ftmedian well depth
107 ft–183 fttypical depth range
21 ftmedian static water level
20 gpmmedian yield (577 tests)

Pull every recorded well near a Mc Farland (53558) address — $49

How deep are wells in and around Mc Farland (53558), Wisconsin?

The median drilled well depth in and around Mc Farland (53558) is 143 ft, based on 598 wells with recorded depths in the state WI DNR database. Half fall between 107 ft and 183 ft; 90% are shallower than 223 ft.

How much does it cost to drill a well in and around Mc Farland (53558)?

Applying published per-foot rates to the local median depth of 143 ft: drilling and casing alone typically runs $3,575–$9,295; a complete system including pump, pressure tank, and hookup typically runs $8,580–$14,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mc Farland (53558)?

The median static water level is 21 ft below ground surface (middle half of wells: 8 ft–45 ft), from 589 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 86 100–150 ft 234 150–200 ft 159 200–300 ft 101 300–400 ft 8 400–600 ft 1 600+ ft 1
Looking at a specific property in Mc Farland (53558)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mc Farland (53558)

Free. Goes to licensed drillers working Dane County.

Part of Dane County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.