Wisconsin Well Data › Iowa County › Mineral Point (53565)
Mineral Point, WI (53565): well depth, water level & drilling cost
✓ 589 WI DNR records · Iowa County
Pull every recorded well near a Mineral Point (53565) address — $49
How deep are wells in and around Mineral Point (53565), Wisconsin?
The median drilled well depth in and around Mineral Point (53565) is 225 ft, based on 373 wells with recorded depths in the state WI DNR database. Half fall between 185 ft and 260 ft; 90% are shallower than 296 ft.
How much does it cost to drill a well in and around Mineral Point (53565)?
Applying published per-foot rates to the local median depth of 225 ft: drilling and casing alone typically runs $5,625–$14,625; a complete system including pump, pressure tank, and hookup typically runs $13,500–$22,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Mineral Point (53565)?
The median static water level is 120 ft below ground surface (middle half of wells: 82 ft–145 ft), from 307 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Iowa County.
Part of Iowa County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.