Wisconsin Well Data › Dane County › Mount Horeb (53572)
Mount Horeb, WI (53572): well depth, water level & drilling cost
✓ 1,161 WI DNR records · Dane County
Pull every recorded well near a Mount Horeb (53572) address — $49
How deep are wells in and around Mount Horeb (53572), Wisconsin?
The median drilled well depth in and around Mount Horeb (53572) is 222 ft, based on 650 wells with recorded depths in the state WI DNR database. Half fall between 177 ft and 262 ft; 90% are shallower than 301 ft.
How much does it cost to drill a well in and around Mount Horeb (53572)?
Applying published per-foot rates to the local median depth of 222 ft: drilling and casing alone typically runs $5,550–$14,430; a complete system including pump, pressure tank, and hookup typically runs $13,320–$22,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Mount Horeb (53572)?
The median static water level is 104 ft below ground surface (middle half of wells: 65 ft–136 ft), from 649 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Dane County.
Part of Dane County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.