⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Sauk County › Plain (53577)

Plain, WI (53577): well depth, water level & drilling cost

✓ 419 WI DNR records · Sauk County

163 ftmedian well depth
120 ft–252 fttypical depth range
70 ftmedian static water level
15 gpmmedian yield (328 tests)

Pull every recorded well near a Plain (53577) address — $49

How deep are wells in and around Plain (53577), Wisconsin?

The median drilled well depth in and around Plain (53577) is 163 ft, based on 318 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 252 ft; 90% are shallower than 360 ft.

How much does it cost to drill a well in and around Plain (53577)?

Applying published per-foot rates to the local median depth of 163 ft: drilling and casing alone typically runs $4,075–$10,595; a complete system including pump, pressure tank, and hookup typically runs $9,780–$16,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Plain (53577)?

The median static water level is 70 ft below ground surface (middle half of wells: 28 ft–143 ft), from 339 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 34 100–150 ft 97 150–200 ft 58 200–300 ft 56 300–400 ft 43 400–600 ft 19 600+ ft 0
Looking at a specific property in Plain (53577)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Plain (53577)

Free. Goes to licensed drillers working Sauk County.

Part of Sauk County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.