⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Iowa County › Rewey (53580)

Rewey, WI (53580): well depth, water level & drilling cost

✓ 339 WI DNR records · Iowa County

231 ftmedian well depth
176 ft–265 fttypical depth range
133 ftmedian static water level
20 gpmmedian yield (143 tests)

Pull every recorded well near a Rewey (53580) address — $49

How deep are wells in and around Rewey (53580), Wisconsin?

The median drilled well depth in and around Rewey (53580) is 231 ft, based on 182 wells with recorded depths in the state WI DNR database. Half fall between 176 ft and 265 ft; 90% are shallower than 319 ft.

How much does it cost to drill a well in and around Rewey (53580)?

Applying published per-foot rates to the local median depth of 231 ft: drilling and casing alone typically runs $5,775–$15,015; a complete system including pump, pressure tank, and hookup typically runs $13,860–$23,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Rewey (53580)?

The median static water level is 133 ft below ground surface (middle half of wells: 83 ft–161 ft), from 143 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 4 100–150 ft 28 150–200 ft 24 200–300 ft 94 300–400 ft 32 400–600 ft 0 600+ ft 0
Looking at a specific property in Rewey (53580)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Rewey (53580)

Free. Goes to licensed drillers working Iowa County.

Part of Iowa County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.