Wisconsin Well Data › Dane County › Sun Prairie (53590)
Sun Prairie, WI (53590): well depth, water level & drilling cost
✓ 1,289 WI DNR records · Dane County
Pull every recorded well near a Sun Prairie (53590) address — $49
How deep are wells in and around Sun Prairie (53590), Wisconsin?
The median drilled well depth in and around Sun Prairie (53590) is 175 ft, based on 718 wells with recorded depths in the state WI DNR database. Half fall between 142 ft and 205 ft; 90% are shallower than 227 ft.
How much does it cost to drill a well in and around Sun Prairie (53590)?
Applying published per-foot rates to the local median depth of 175 ft: drilling and casing alone typically runs $4,375–$11,375; a complete system including pump, pressure tank, and hookup typically runs $10,500–$17,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Sun Prairie (53590)?
The median static water level is 57 ft below ground surface (middle half of wells: 35 ft–82 ft), from 716 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Dane County.
Part of Dane County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.