⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Iowa County › Dodgeville (53595)

Dodgeville, WI (53595): well depth, water level & drilling cost

✓ 491 WI DNR records · Iowa County

300 ftmedian well depth
220 ft–340 fttypical depth range
190 ftmedian static water level
20 gpmmedian yield (270 tests)

Pull every recorded well near a Dodgeville (53595) address — $49

How deep are wells in and around Dodgeville (53595), Wisconsin?

The median drilled well depth in and around Dodgeville (53595) is 300 ft, based on 361 wells with recorded depths in the state WI DNR database. Half fall between 220 ft and 340 ft; 90% are shallower than 395 ft.

How much does it cost to drill a well in and around Dodgeville (53595)?

Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dodgeville (53595)?

The median static water level is 190 ft below ground surface (middle half of wells: 120 ft–224 ft), from 271 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 7 100–150 ft 28 150–200 ft 26 200–300 ft 105 300–400 ft 159 400–600 ft 33 600+ ft 3
Looking at a specific property in Dodgeville (53595)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dodgeville (53595)

Free. Goes to licensed drillers working Iowa County.

Part of Iowa County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.