⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Sauk County › Baraboo (53913)

Baraboo, WI (53913): well depth, water level & drilling cost

✓ 1,450 WI DNR records · Sauk County

180 ftmedian well depth
130 ft–238 fttypical depth range
80 ftmedian static water level
18 gpmmedian yield (988 tests)

Pull every recorded well near a Baraboo (53913) address — $49

How deep are wells in and around Baraboo (53913), Wisconsin?

The median drilled well depth in and around Baraboo (53913) is 180 ft, based on 1,003 wells with recorded depths in the state WI DNR database. Half fall between 130 ft and 238 ft; 90% are shallower than 314 ft.

How much does it cost to drill a well in and around Baraboo (53913)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Baraboo (53913)?

The median static water level is 80 ft below ground surface (middle half of wells: 39 ft–112 ft), from 1,003 measurements.

Drilled depth distribution

0–50 ft 12 50–100 ft 92 100–150 ft 234 150–200 ft 260 200–300 ft 273 300–400 ft 88 400–600 ft 42 600+ ft 2
Looking at a specific property in Baraboo (53913)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Baraboo (53913)

Free. Goes to licensed drillers working Sauk County.

Part of Sauk County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.