⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Green Lake County › Dalton (53926)

Dalton, WI (53926): well depth, water level & drilling cost

✓ 656 WI DNR records · Green Lake County

142 ftmedian well depth
118 ft–180 fttypical depth range
40 ftmedian static water level
20 gpmmedian yield (413 tests)

Pull every recorded well near a Dalton (53926) address — $49

How deep are wells in and around Dalton (53926), Wisconsin?

The median drilled well depth in and around Dalton (53926) is 142 ft, based on 416 wells with recorded depths in the state WI DNR database. Half fall between 118 ft and 180 ft; 90% are shallower than 222 ft.

How much does it cost to drill a well in and around Dalton (53926)?

Applying published per-foot rates to the local median depth of 142 ft: drilling and casing alone typically runs $3,550–$9,230; a complete system including pump, pressure tank, and hookup typically runs $8,520–$14,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dalton (53926)?

The median static water level is 40 ft below ground surface (middle half of wells: 22 ft–60 ft), from 414 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 48 100–150 ft 179 150–200 ft 112 200–300 ft 64 300–400 ft 4 400–600 ft 0 600+ ft 0
Looking at a specific property in Dalton (53926)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dalton (53926)

Free. Goes to licensed drillers working Green Lake County.

Part of Green Lake County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.