⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Adams County › Dellwood (53927)

Dellwood, WI (53927): well depth, water level & drilling cost

✓ 2,614 WI DNR records · Adams County

56 ftmedian well depth
46 ft–62 fttypical depth range
16 ftmedian static water level
15 gpmmedian yield (2,265 tests)

Pull every recorded well near a Dellwood (53927) address — $49

How deep are wells in and around Dellwood (53927), Wisconsin?

The median drilled well depth in and around Dellwood (53927) is 56 ft, based on 2,325 wells with recorded depths in the state WI DNR database. Half fall between 46 ft and 62 ft; 90% are shallower than 80 ft.

How much does it cost to drill a well in and around Dellwood (53927)?

Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dellwood (53927)?

The median static water level is 16 ft below ground surface (middle half of wells: 10 ft–22 ft), from 2,371 measurements.

Drilled depth distribution

0–50 ft 926 50–100 ft 1,280 100–150 ft 108 150–200 ft 7 200–300 ft 3 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Dellwood (53927)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dellwood (53927)

Free. Goes to licensed drillers working Adams County.

Part of Adams County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.