Wisconsin Well Data › Columbia County › Doylestown (53928)
Doylestown, WI (53928): well depth, water level & drilling cost
✓ 457 WI DNR records · Columbia County
Pull every recorded well near a Doylestown (53928) address — $49
How deep are wells in and around Doylestown (53928), Wisconsin?
The median drilled well depth in and around Doylestown (53928) is 127 ft, based on 187 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 152 ft; 90% are shallower than 184 ft.
How much does it cost to drill a well in and around Doylestown (53928)?
Applying published per-foot rates to the local median depth of 127 ft: drilling and casing alone typically runs $3,175–$8,255; a complete system including pump, pressure tank, and hookup typically runs $7,620–$12,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Doylestown (53928)?
The median static water level is 32 ft below ground surface (middle half of wells: 22 ft–50 ft), from 185 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Columbia County.
Part of Columbia County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.