Wisconsin Well Data › Columbia County › Fall River (53932)
Fall River, WI (53932): well depth, water level & drilling cost
✓ 524 WI DNR records · Columbia County
Pull every recorded well near a Fall River (53932) address — $49
How deep are wells in and around Fall River (53932), Wisconsin?
The median drilled well depth in and around Fall River (53932) is 127 ft, based on 278 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 150 ft; 90% are shallower than 163 ft.
How much does it cost to drill a well in and around Fall River (53932)?
Applying published per-foot rates to the local median depth of 127 ft: drilling and casing alone typically runs $3,175–$8,255; a complete system including pump, pressure tank, and hookup typically runs $7,620–$12,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Fall River (53932)?
The median static water level is 29 ft below ground surface (middle half of wells: 18 ft–42 ft), from 277 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Columbia County.
Part of Columbia County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.