Wisconsin Well Data › Adams County › Grand Marsh (53936)
Grand Marsh, WI (53936): well depth, water level & drilling cost
✓ 1,490 WI DNR records · Adams County
Pull every recorded well near a Grand Marsh (53936) address — $49
How deep are wells in and around Grand Marsh (53936), Wisconsin?
The median drilled well depth in and around Grand Marsh (53936) is 80 ft, based on 1,081 wells with recorded depths in the state WI DNR database. Half fall between 63 ft and 123 ft; 90% are shallower than 162 ft.
How much does it cost to drill a well in and around Grand Marsh (53936)?
Applying published per-foot rates to the local median depth of 79 ft: drilling and casing alone typically runs $1,975–$5,135; a complete system including pump, pressure tank, and hookup typically runs $4,740–$7,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Grand Marsh (53936)?
The median static water level is 35 ft below ground surface (middle half of wells: 19 ft–63 ft), from 1,053 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Adams County.
Part of Adams County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.