⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Sauk County › Lime Ridge (53942)

Lime Ridge, WI (53942): well depth, water level & drilling cost

✓ 335 WI DNR records · Sauk County

185 ftmedian well depth
125 ft–313 fttypical depth range
99 ftmedian static water level
15 gpmmedian yield (249 tests)

Pull every recorded well near a Lime Ridge (53942) address — $49

How deep are wells in and around Lime Ridge (53942), Wisconsin?

The median drilled well depth in and around Lime Ridge (53942) is 185 ft, based on 283 wells with recorded depths in the state WI DNR database. Half fall between 125 ft and 313 ft; 90% are shallower than 400 ft.

How much does it cost to drill a well in and around Lime Ridge (53942)?

Applying published per-foot rates to the local median depth of 185 ft: drilling and casing alone typically runs $4,625–$12,025; a complete system including pump, pressure tank, and hookup typically runs $11,100–$18,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lime Ridge (53942)?

The median static water level is 99 ft below ground surface (middle half of wells: 68 ft–209 ft), from 264 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 24 100–150 ft 71 150–200 ft 51 200–300 ft 55 300–400 ft 44 400–600 ft 35 600+ ft 0
Looking at a specific property in Lime Ridge (53942)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lime Ridge (53942)

Free. Goes to licensed drillers working Sauk County.

Part of Sauk County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.