⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Sauk County › Loganville (53943)

Loganville, WI (53943): well depth, water level & drilling cost

✓ 266 WI DNR records · Sauk County

175 ftmedian well depth
125 ft–251 fttypical depth range
89 ftmedian static water level
15 gpmmedian yield (183 tests)

Pull every recorded well near a Loganville (53943) address — $49

How deep are wells in and around Loganville (53943), Wisconsin?

The median drilled well depth in and around Loganville (53943) is 175 ft, based on 188 wells with recorded depths in the state WI DNR database. Half fall between 125 ft and 251 ft; 90% are shallower than 331 ft.

How much does it cost to drill a well in and around Loganville (53943)?

Applying published per-foot rates to the local median depth of 175 ft: drilling and casing alone typically runs $4,375–$11,375; a complete system including pump, pressure tank, and hookup typically runs $10,500–$17,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Loganville (53943)?

The median static water level is 89 ft below ground surface (middle half of wells: 44 ft–146 ft), from 208 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 22 100–150 ft 49 150–200 ft 32 200–300 ft 53 300–400 ft 25 400–600 ft 4 600+ ft 0
Looking at a specific property in Loganville (53943)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Loganville (53943)

Free. Goes to licensed drillers working Sauk County.

Part of Sauk County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.