⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Green Lake County › Markesan (53946)

Markesan, WI (53946): well depth, water level & drilling cost

✓ 686 WI DNR records · Green Lake County

147 ftmedian well depth
122 ft–179 fttypical depth range
41 ftmedian static water level
20 gpmmedian yield (247 tests)

Pull every recorded well near a Markesan (53946) address — $49

How deep are wells in and around Markesan (53946), Wisconsin?

The median drilled well depth in and around Markesan (53946) is 147 ft, based on 251 wells with recorded depths in the state WI DNR database. Half fall between 122 ft and 179 ft; 90% are shallower than 228 ft.

How much does it cost to drill a well in and around Markesan (53946)?

Applying published per-foot rates to the local median depth of 147 ft: drilling and casing alone typically runs $3,675–$9,555; a complete system including pump, pressure tank, and hookup typically runs $8,820–$14,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Markesan (53946)?

The median static water level is 41 ft below ground surface (middle half of wells: 20 ft–74 ft), from 249 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 14 100–150 ft 123 150–200 ft 71 200–300 ft 36 300–400 ft 5 400–600 ft 1 600+ ft 0
Looking at a specific property in Markesan (53946)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Markesan (53946)

Free. Goes to licensed drillers working Green Lake County.

Part of Green Lake County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.