⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Sauk County › Reedsburg (53958)

Reedsburg, WI (53958): well depth, water level & drilling cost

✓ 245 WI DNR records · Sauk County

180 ftmedian well depth
130 ft–301 fttypical depth range
77 ftmedian static water level
15 gpmmedian yield (159 tests)

Pull every recorded well near a Reedsburg (53958) address — $49

How deep are wells in and around Reedsburg (53958), Wisconsin?

The median drilled well depth in and around Reedsburg (53958) is 180 ft, based on 175 wells with recorded depths in the state WI DNR database. Half fall between 130 ft and 301 ft; 90% are shallower than 404 ft.

How much does it cost to drill a well in and around Reedsburg (53958)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Reedsburg (53958)?

The median static water level is 77 ft below ground surface (middle half of wells: 25 ft–135 ft), from 173 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 14 100–150 ft 51 150–200 ft 31 200–300 ft 32 300–400 ft 23 400–600 ft 22 600+ ft 1
Looking at a specific property in Reedsburg (53958)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Reedsburg (53958)

Free. Goes to licensed drillers working Sauk County.

Part of Sauk County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.