⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Sauk County › Reedsburg (53959)

Reedsburg, WI (53959): well depth, water level & drilling cost

✓ 993 WI DNR records · Sauk County

108 ftmedian well depth
90 ft–152 fttypical depth range
35 ftmedian static water level
18 gpmmedian yield (790 tests)

Pull every recorded well near a Reedsburg (53959) address — $49

How deep are wells in and around Reedsburg (53959), Wisconsin?

The median drilled well depth in and around Reedsburg (53959) is 108 ft, based on 732 wells with recorded depths in the state WI DNR database. Half fall between 90 ft and 152 ft; 90% are shallower than 242 ft.

How much does it cost to drill a well in and around Reedsburg (53959)?

Applying published per-foot rates to the local median depth of 108 ft: drilling and casing alone typically runs $2,700–$7,020; a complete system including pump, pressure tank, and hookup typically runs $6,480–$10,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Reedsburg (53959)?

The median static water level is 35 ft below ground surface (middle half of wells: 19 ft–71 ft), from 828 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 216 100–150 ft 319 150–200 ft 83 200–300 ft 73 300–400 ft 24 400–600 ft 12 600+ ft 0
Looking at a specific property in Reedsburg (53959)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Reedsburg (53959)

Free. Goes to licensed drillers working Sauk County.

Part of Sauk County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.