⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Polk County › Amery (54001)

Amery, WI (54001): well depth, water level & drilling cost

✓ 1,651 WI DNR records · Polk County

92 ftmedian well depth
70 ft–125 fttypical depth range
35 ftmedian static water level
10 gpmmedian yield (1,249 tests)

Pull every recorded well near a Amery (54001) address — $49

How deep are wells in and around Amery (54001), Wisconsin?

The median drilled well depth in and around Amery (54001) is 92 ft, based on 1,261 wells with recorded depths in the state WI DNR database. Half fall between 70 ft and 125 ft; 90% are shallower than 161 ft.

How much does it cost to drill a well in and around Amery (54001)?

Applying published per-foot rates to the local median depth of 91 ft: drilling and casing alone typically runs $2,275–$5,915; a complete system including pump, pressure tank, and hookup typically runs $5,460–$9,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Amery (54001)?

The median static water level is 35 ft below ground surface (middle half of wells: 20 ft–50 ft), from 1,259 measurements.

Drilled depth distribution

0–50 ft 85 50–100 ft 594 100–150 ft 392 150–200 ft 133 200–300 ft 54 300–400 ft 2 400–600 ft 1 600+ ft 0
Looking at a specific property in Amery (54001)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Amery (54001)

Free. Goes to licensed drillers working Polk County.

Part of Polk County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.