⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Barron County › Clayton (54004)

Clayton, WI (54004): well depth, water level & drilling cost

✓ 534 WI DNR records · Barron County

140 ftmedian well depth
102 ft–170 fttypical depth range
70 ftmedian static water level
10 gpmmedian yield (340 tests)

Pull every recorded well near a Clayton (54004) address — $49

How deep are wells in and around Clayton (54004), Wisconsin?

The median drilled well depth in and around Clayton (54004) is 140 ft, based on 365 wells with recorded depths in the state WI DNR database. Half fall between 102 ft and 170 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Clayton (54004)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Clayton (54004)?

The median static water level is 70 ft below ground surface (middle half of wells: 34 ft–97 ft), from 351 measurements.

Drilled depth distribution

0–50 ft 22 50–100 ft 57 100–150 ft 137 150–200 ft 102 200–300 ft 46 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Clayton (54004)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Clayton (54004)

Free. Goes to licensed drillers working Barron County.

Part of Barron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.