⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › St. Croix County › Deer Park (54007)

Deer Park, WI (54007): well depth, water level & drilling cost

✓ 571 WI DNR records · St. Croix County

128 ftmedian well depth
103 ft–160 fttypical depth range
60 ftmedian static water level
10 gpmmedian yield (394 tests)

Pull every recorded well near a Deer Park (54007) address — $49

How deep are wells in and around Deer Park (54007), Wisconsin?

The median drilled well depth in and around Deer Park (54007) is 128 ft, based on 398 wells with recorded depths in the state WI DNR database. Half fall between 103 ft and 160 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Deer Park (54007)?

Applying published per-foot rates to the local median depth of 128 ft: drilling and casing alone typically runs $3,200–$8,320; a complete system including pump, pressure tank, and hookup typically runs $7,680–$12,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Deer Park (54007)?

The median static water level is 60 ft below ground surface (middle half of wells: 40 ft–86 ft), from 396 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 67 100–150 ft 193 150–200 ft 95 200–300 ft 38 300–400 ft 5 400–600 ft 0 600+ ft 0
Looking at a specific property in Deer Park (54007)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Deer Park (54007)

Free. Goes to licensed drillers working St. Croix County.

Part of St. Croix County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.