⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Pierce County › Ellsworth (54011)

Ellsworth, WI (54011): well depth, water level & drilling cost

✓ 567 WI DNR records · Pierce County

180 ftmedian well depth
120 ft–265 fttypical depth range
119 ftmedian static water level
10 gpmmedian yield (346 tests)

Pull every recorded well near a Ellsworth (54011) address — $49

How deep are wells in and around Ellsworth (54011), Wisconsin?

The median drilled well depth in and around Ellsworth (54011) is 180 ft, based on 352 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 265 ft; 90% are shallower than 310 ft.

How much does it cost to drill a well in and around Ellsworth (54011)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Ellsworth (54011)?

The median static water level is 119 ft below ground surface (middle half of wells: 56 ft–198 ft), from 349 measurements.

Drilled depth distribution

0–50 ft 7 50–100 ft 51 100–150 ft 86 150–200 ft 46 200–300 ft 117 300–400 ft 38 400–600 ft 2 600+ ft 5
Looking at a specific property in Ellsworth (54011)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Ellsworth (54011)

Free. Goes to licensed drillers working Pierce County.

Part of Pierce County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.