Wisconsin Well Data › St. Croix County › Glenwood City (54013)
Glenwood City, WI (54013): well depth, water level & drilling cost
✓ 476 WI DNR records · St. Croix County
Pull every recorded well near a Glenwood City (54013) address — $49
How deep are wells in and around Glenwood City (54013), Wisconsin?
The median drilled well depth in and around Glenwood City (54013) is 175 ft, based on 357 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 220 ft; 90% are shallower than 256 ft.
How much does it cost to drill a well in and around Glenwood City (54013)?
Applying published per-foot rates to the local median depth of 175 ft: drilling and casing alone typically runs $4,375–$11,375; a complete system including pump, pressure tank, and hookup typically runs $10,500–$17,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Glenwood City (54013)?
The median static water level is 106 ft below ground surface (middle half of wells: 57 ft–150 ft), from 346 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working St. Croix County.
Part of St. Croix County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.