⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Pierce County › Hager City (54014)

Hager City, WI (54014): well depth, water level & drilling cost

✓ 623 WI DNR records · Pierce County

161 ftmedian well depth
104 ft–280 fttypical depth range
92 ftmedian static water level
10 gpmmedian yield (380 tests)

Pull every recorded well near a Hager City (54014) address — $49

How deep are wells in and around Hager City (54014), Wisconsin?

The median drilled well depth in and around Hager City (54014) is 161 ft, based on 386 wells with recorded depths in the state WI DNR database. Half fall between 104 ft and 280 ft; 90% are shallower than 370 ft.

How much does it cost to drill a well in and around Hager City (54014)?

Applying published per-foot rates to the local median depth of 161 ft: drilling and casing alone typically runs $4,025–$10,465; a complete system including pump, pressure tank, and hookup typically runs $9,660–$16,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hager City (54014)?

The median static water level is 92 ft below ground surface (middle half of wells: 54 ft–205 ft), from 381 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 74 100–150 ft 91 150–200 ft 83 200–300 ft 41 300–400 ft 77 400–600 ft 11 600+ ft 1
Looking at a specific property in Hager City (54014)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hager City (54014)

Free. Goes to licensed drillers working Pierce County.

Part of Pierce County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.