⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › St. Croix County › Hammond (54015)

Hammond, WI (54015): well depth, water level & drilling cost

✓ 1,094 WI DNR records · St. Croix County

125 ftmedian well depth
100 ft–160 fttypical depth range
70 ftmedian static water level
10 gpmmedian yield (927 tests)

Pull every recorded well near a Hammond (54015) address — $49

How deep are wells in and around Hammond (54015), Wisconsin?

The median drilled well depth in and around Hammond (54015) is 125 ft, based on 937 wells with recorded depths in the state WI DNR database. Half fall between 100 ft and 160 ft; 90% are shallower than 180 ft.

How much does it cost to drill a well in and around Hammond (54015)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hammond (54015)?

The median static water level is 70 ft below ground surface (middle half of wells: 49 ft–95 ft), from 928 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 178 100–150 ft 483 150–200 ft 212 200–300 ft 64 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Hammond (54015)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hammond (54015)

Free. Goes to licensed drillers working St. Croix County.

Part of St. Croix County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.