⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › St. Croix County › Hudson (54016)

Hudson, WI (54016): well depth, water level & drilling cost

✓ 3,702 WI DNR records · St. Croix County

180 ftmedian well depth
143 ft–235 fttypical depth range
105 ftmedian static water level
10 gpmmedian yield (2,569 tests)

Pull every recorded well near a Hudson (54016) address — $49

How deep are wells in and around Hudson (54016), Wisconsin?

The median drilled well depth in and around Hudson (54016) is 180 ft, based on 2,625 wells with recorded depths in the state WI DNR database. Half fall between 143 ft and 235 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Hudson (54016)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hudson (54016)?

The median static water level is 105 ft below ground surface (middle half of wells: 80 ft–160 ft), from 2,594 measurements.

Drilled depth distribution

0–50 ft 13 50–100 ft 53 100–150 ft 749 150–200 ft 723 200–300 ft 823 300–400 ft 212 400–600 ft 52 600+ ft 0
Looking at a specific property in Hudson (54016)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hudson (54016)

Free. Goes to licensed drillers working St. Croix County.

Part of St. Croix County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.