Wisconsin Well Data › St. Croix County › Somerset (54025)
Somerset, WI (54025): well depth, water level & drilling cost
✓ 1,928 WI DNR records · St. Croix County
Pull every recorded well near a Somerset (54025) address — $49
How deep are wells in and around Somerset (54025), Wisconsin?
The median drilled well depth in and around Somerset (54025) is 170 ft, based on 1,580 wells with recorded depths in the state WI DNR database. Half fall between 135 ft and 230 ft; 90% are shallower than 283 ft.
How much does it cost to drill a well in and around Somerset (54025)?
Applying published per-foot rates to the local median depth of 170 ft: drilling and casing alone typically runs $4,250–$11,050; a complete system including pump, pressure tank, and hookup typically runs $10,200–$17,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Somerset (54025)?
The median static water level is 90 ft below ground surface (middle half of wells: 60 ft–134 ft), from 1,577 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working St. Croix County.
Part of St. Croix County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.