Wisconsin Well Data › Polk County › Star Prairie (54026)
Star Prairie, WI (54026): well depth, water level & drilling cost
✓ 1,725 WI DNR records · Polk County
Pull every recorded well near a Star Prairie (54026) address — $49
How deep are wells in and around Star Prairie (54026), Wisconsin?
The median drilled well depth in and around Star Prairie (54026) is 116 ft, based on 1,377 wells with recorded depths in the state WI DNR database. Half fall between 87 ft and 151 ft; 90% are shallower than 200 ft.
How much does it cost to drill a well in and around Star Prairie (54026)?
Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Star Prairie (54026)?
The median static water level is 50 ft below ground surface (middle half of wells: 30 ft–80 ft), from 1,373 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Polk County.
Part of Polk County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.