⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › St. Croix County › Wilson (54027)

Wilson, WI (54027): well depth, water level & drilling cost

✓ 447 WI DNR records · St. Croix County

180 ftmedian well depth
143 ft–220 fttypical depth range
119 ftmedian static water level
12 gpmmedian yield (328 tests)

Pull every recorded well near a Wilson (54027) address — $49

How deep are wells in and around Wilson (54027), Wisconsin?

The median drilled well depth in and around Wilson (54027) is 180 ft, based on 333 wells with recorded depths in the state WI DNR database. Half fall between 143 ft and 220 ft; 90% are shallower than 263 ft.

How much does it cost to drill a well in and around Wilson (54027)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wilson (54027)?

The median static water level is 119 ft below ground surface (middle half of wells: 80 ft–155 ft), from 330 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 8 100–150 ft 89 150–200 ft 93 200–300 ft 127 300–400 ft 12 400–600 ft 0 600+ ft 2
Looking at a specific property in Wilson (54027)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wilson (54027)

Free. Goes to licensed drillers working St. Croix County.

Part of St. Croix County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.