⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Oconto County › Abrams (54101)

Abrams, WI (54101): well depth, water level & drilling cost

✓ 1,284 WI DNR records · Oconto County

142 ftmedian well depth
120 ft–163 fttypical depth range
18 ftmedian static water level
25 gpmmedian yield (840 tests)

Pull every recorded well near a Abrams (54101) address — $49

How deep are wells in and around Abrams (54101), Wisconsin?

The median drilled well depth in and around Abrams (54101) is 142 ft, based on 854 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 163 ft; 90% are shallower than 184 ft.

How much does it cost to drill a well in and around Abrams (54101)?

Applying published per-foot rates to the local median depth of 142 ft: drilling and casing alone typically runs $3,550–$9,230; a complete system including pump, pressure tank, and hookup typically runs $8,520–$14,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Abrams (54101)?

The median static water level is 18 ft below ground surface (middle half of wells: 10 ft–25 ft), from 840 measurements.

Drilled depth distribution

0–50 ft 6 50–100 ft 88 100–150 ft 428 150–200 ft 256 200–300 ft 74 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Abrams (54101)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Abrams (54101)

Free. Goes to licensed drillers working Oconto County.

Part of Oconto County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.