⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Marinette County › Amberg (54102)

Amberg, WI (54102): well depth, water level & drilling cost

✓ 858 WI DNR records · Marinette County

180 ftmedian well depth
75 ft–244 fttypical depth range
28 ftmedian static water level
6 gpmmedian yield (636 tests)

Pull every recorded well near a Amberg (54102) address — $49

How deep are wells in and around Amberg (54102), Wisconsin?

The median drilled well depth in and around Amberg (54102) is 180 ft, based on 640 wells with recorded depths in the state WI DNR database. Half fall between 75 ft and 244 ft; 90% are shallower than 282 ft.

How much does it cost to drill a well in and around Amberg (54102)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Amberg (54102)?

The median static water level is 28 ft below ground surface (middle half of wells: 20 ft–40 ft), from 642 measurements.

Drilled depth distribution

0–50 ft 49 50–100 ft 165 100–150 ft 81 150–200 ft 42 200–300 ft 249 300–400 ft 53 400–600 ft 1 600+ ft 0
Looking at a specific property in Amberg (54102)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Amberg (54102)

Free. Goes to licensed drillers working Marinette County.

Part of Marinette County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.