⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Calumet County › Brillion (54110)

Brillion, WI (54110): well depth, water level & drilling cost

✓ 310 WI DNR records · Calumet County

160 ftmedian well depth
121 ft–214 fttypical depth range
43 ftmedian static water level
20 gpmmedian yield (157 tests)

Pull every recorded well near a Brillion (54110) address — $49

How deep are wells in and around Brillion (54110), Wisconsin?

The median drilled well depth in and around Brillion (54110) is 160 ft, based on 163 wells with recorded depths in the state WI DNR database. Half fall between 121 ft and 214 ft; 90% are shallower than 342 ft.

How much does it cost to drill a well in and around Brillion (54110)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Brillion (54110)?

The median static water level is 43 ft below ground surface (middle half of wells: 30 ft–60 ft), from 160 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 13 100–150 ft 59 150–200 ft 38 200–300 ft 34 300–400 ft 6 400–600 ft 2 600+ ft 11
Looking at a specific property in Brillion (54110)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Brillion (54110)

Free. Goes to licensed drillers working Calumet County.

Part of Calumet County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.