⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Marinette County › Coleman (54112)

Coleman, WI (54112): well depth, water level & drilling cost

✓ 967 WI DNR records · Marinette County

122 ftmedian well depth
102 ft–144 fttypical depth range
20 ftmedian static water level
21 gpmmedian yield (497 tests)

Pull every recorded well near a Coleman (54112) address — $49

How deep are wells in and around Coleman (54112), Wisconsin?

The median drilled well depth in and around Coleman (54112) is 122 ft, based on 514 wells with recorded depths in the state WI DNR database. Half fall between 102 ft and 144 ft; 90% are shallower than 180 ft.

How much does it cost to drill a well in and around Coleman (54112)?

Applying published per-foot rates to the local median depth of 122 ft: drilling and casing alone typically runs $3,050–$7,930; a complete system including pump, pressure tank, and hookup typically runs $7,320–$12,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Coleman (54112)?

The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–30 ft), from 508 measurements.

Drilled depth distribution

0–50 ft 14 50–100 ft 68 100–150 ft 320 150–200 ft 81 200–300 ft 29 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Coleman (54112)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Coleman (54112)

Free. Goes to licensed drillers working Marinette County.

Part of Marinette County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.