⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Brown County › De Pere (54115)

De Pere, WI (54115): well depth, water level & drilling cost

✓ 555 WI DNR records · Brown County

281 ftmedian well depth
122 ft–322 fttypical depth range
120 ftmedian static water level
30 gpmmedian yield (340 tests)

Pull every recorded well near a De Pere (54115) address — $49

How deep are wells in and around De Pere (54115), Wisconsin?

The median drilled well depth in and around De Pere (54115) is 281 ft, based on 347 wells with recorded depths in the state WI DNR database. Half fall between 122 ft and 322 ft; 90% are shallower than 482 ft.

How much does it cost to drill a well in and around De Pere (54115)?

Applying published per-foot rates to the local median depth of 281 ft: drilling and casing alone typically runs $7,025–$18,265; a complete system including pump, pressure tank, and hookup typically runs $16,860–$28,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around De Pere (54115)?

The median static water level is 120 ft below ground surface (middle half of wells: 40 ft–170 ft), from 343 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 40 100–150 ft 63 150–200 ft 13 200–300 ft 91 300–400 ft 82 400–600 ft 37 600+ ft 20
Looking at a specific property in De Pere (54115)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in De Pere (54115)

Free. Goes to licensed drillers working Brown County.

Part of Brown County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.