⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Marinette County › Dunbar (54119)

Dunbar, WI (54119): well depth, water level & drilling cost

✓ 615 WI DNR records · Marinette County

108 ftmedian well depth
63 ft–250 fttypical depth range
28 ftmedian static water level
7 gpmmedian yield (461 tests)

Pull every recorded well near a Dunbar (54119) address — $49

How deep are wells in and around Dunbar (54119), Wisconsin?

The median drilled well depth in and around Dunbar (54119) is 108 ft, based on 475 wells with recorded depths in the state WI DNR database. Half fall between 63 ft and 250 ft; 90% are shallower than 303 ft.

How much does it cost to drill a well in and around Dunbar (54119)?

Applying published per-foot rates to the local median depth of 108 ft: drilling and casing alone typically runs $2,700–$7,020; a complete system including pump, pressure tank, and hookup typically runs $6,480–$10,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dunbar (54119)?

The median static water level is 28 ft below ground surface (middle half of wells: 15 ft–40 ft), from 468 measurements.

Drilled depth distribution

0–50 ft 71 50–100 ft 147 100–150 ft 52 150–200 ft 14 200–300 ft 119 300–400 ft 66 400–600 ft 6 600+ ft 0
Looking at a specific property in Dunbar (54119)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dunbar (54119)

Free. Goes to licensed drillers working Marinette County.

Part of Marinette County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.