⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Florence County › Fence (54120)

Fence, WI (54120): well depth, water level & drilling cost

✓ 652 WI DNR records · Florence County

65 ftmedian well depth
51 ft–121 fttypical depth range
25 ftmedian static water level
12 gpmmedian yield (470 tests)

Pull every recorded well near a Fence (54120) address — $49

How deep are wells in and around Fence (54120), Wisconsin?

The median drilled well depth in and around Fence (54120) is 65 ft, based on 479 wells with recorded depths in the state WI DNR database. Half fall between 51 ft and 121 ft; 90% are shallower than 240 ft.

How much does it cost to drill a well in and around Fence (54120)?

Applying published per-foot rates to the local median depth of 65 ft: drilling and casing alone typically runs $1,625–$4,225; a complete system including pump, pressure tank, and hookup typically runs $3,900–$6,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Fence (54120)?

The median static water level is 25 ft below ground surface (middle half of wells: 15 ft–45 ft), from 477 measurements.

Drilled depth distribution

0–50 ft 110 50–100 ft 231 100–150 ft 54 150–200 ft 26 200–300 ft 31 300–400 ft 26 400–600 ft 1 600+ ft 0
Looking at a specific property in Fence (54120)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Fence (54120)

Free. Goes to licensed drillers working Florence County.

Part of Florence County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.