⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Brown County › Greenleaf (54126)

Greenleaf, WI (54126): well depth, water level & drilling cost

✓ 1,258 WI DNR records · Brown County

161 ftmedian well depth
103 ft–262 fttypical depth range
40 ftmedian static water level
25 gpmmedian yield (794 tests)

Pull every recorded well near a Greenleaf (54126) address — $49

How deep are wells in and around Greenleaf (54126), Wisconsin?

The median drilled well depth in and around Greenleaf (54126) is 161 ft, based on 816 wells with recorded depths in the state WI DNR database. Half fall between 103 ft and 262 ft; 90% are shallower than 488 ft.

How much does it cost to drill a well in and around Greenleaf (54126)?

Applying published per-foot rates to the local median depth of 161 ft: drilling and casing alone typically runs $4,025–$10,465; a complete system including pump, pressure tank, and hookup typically runs $9,660–$16,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Greenleaf (54126)?

The median static water level is 40 ft below ground surface (middle half of wells: 20 ft–63 ft), from 799 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 109 100–150 ft 271 150–200 ft 111 200–300 ft 145 300–400 ft 61 400–600 ft 69 600+ ft 39
Looking at a specific property in Greenleaf (54126)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Greenleaf (54126)

Free. Goes to licensed drillers working Brown County.

Part of Brown County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.