⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Calumet County › Hilbert (54129)

Hilbert, WI (54129): well depth, water level & drilling cost

✓ 205 WI DNR records · Calumet County

102 ftmedian well depth
85 ft–182 fttypical depth range
27 ftmedian static water level
20 gpmmedian yield (111 tests)

Pull every recorded well near a Hilbert (54129) address — $49

How deep are wells in and around Hilbert (54129), Wisconsin?

The median drilled well depth in and around Hilbert (54129) is 102 ft, based on 113 wells with recorded depths in the state WI DNR database. Half fall between 85 ft and 182 ft; 90% are shallower than 438 ft.

How much does it cost to drill a well in and around Hilbert (54129)?

Applying published per-foot rates to the local median depth of 102 ft: drilling and casing alone typically runs $2,550–$6,630; a complete system including pump, pressure tank, and hookup typically runs $6,120–$10,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hilbert (54129)?

The median static water level is 27 ft below ground surface (middle half of wells: 15 ft–44 ft), from 113 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 31 100–150 ft 46 150–200 ft 6 200–300 ft 14 300–400 ft 1 400–600 ft 8 600+ ft 4
Looking at a specific property in Hilbert (54129)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hilbert (54129)

Free. Goes to licensed drillers working Calumet County.

Part of Calumet County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.