⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Menominee County › Keshena (54135)

Keshena, WI (54135): well depth, water level & drilling cost

✓ 1,352 WI DNR records · Menominee County

63 ftmedian well depth
45 ft–84 fttypical depth range
19 ftmedian static water level
15 gpmmedian yield (1,022 tests)

Pull every recorded well near a Keshena (54135) address — $49

How deep are wells in and around Keshena (54135), Wisconsin?

The median drilled well depth in and around Keshena (54135) is 63 ft, based on 1,030 wells with recorded depths in the state WI DNR database. Half fall between 45 ft and 84 ft; 90% are shallower than 156 ft.

How much does it cost to drill a well in and around Keshena (54135)?

Applying published per-foot rates to the local median depth of 62 ft: drilling and casing alone typically runs $1,550–$4,030; a complete system including pump, pressure tank, and hookup typically runs $3,720–$6,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Keshena (54135)?

The median static water level is 19 ft below ground surface (middle half of wells: 12 ft–27 ft), from 1,031 measurements.

Drilled depth distribution

0–50 ft 324 50–100 ft 496 100–150 ft 98 150–200 ft 27 200–300 ft 58 300–400 ft 27 400–600 ft 0 600+ ft 0
Looking at a specific property in Keshena (54135)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Keshena (54135)

Free. Goes to licensed drillers working Menominee County.

Part of Menominee County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.