⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Outagamie County › Kimberly (54136)

Kimberly, WI (54136): well depth, water level & drilling cost

✓ 91 WI DNR records · Outagamie County

282 ftmedian well depth
261 ft–320 fttypical depth range
120 ftmedian static water level
40 gpmmedian yield (24 tests)

Pull every recorded well near a Kimberly (54136) address — $49

How deep are wells in and around Kimberly (54136), Wisconsin?

The median drilled well depth in and around Kimberly (54136) is 282 ft, based on 25 wells with recorded depths in the state WI DNR database. Half fall between 261 ft and 320 ft; 90% are shallower than 424 ft.

How much does it cost to drill a well in and around Kimberly (54136)?

Applying published per-foot rates to the local median depth of 282 ft: drilling and casing alone typically runs $7,050–$18,330; a complete system including pump, pressure tank, and hookup typically runs $16,920–$28,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kimberly (54136)?

The median static water level is 120 ft below ground surface (middle half of wells: 88 ft–129 ft), from 24 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 2 100–150 ft 1 150–200 ft 0 200–300 ft 13 300–400 ft 4 400–600 ft 5 600+ ft 0
Looking at a specific property in Kimberly (54136)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kimberly (54136)

Free. Goes to licensed drillers working Outagamie County.

Part of Outagamie County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.