Wisconsin Well Data › Outagamie County › Little Chute (54140)
Little Chute, WI (54140): well depth, water level & drilling cost
✓ 323 WI DNR records · Outagamie County
Pull every recorded well near a Little Chute (54140) address — $49
How deep are wells in and around Little Chute (54140), Wisconsin?
The median drilled well depth in and around Little Chute (54140) is 282 ft, based on 166 wells with recorded depths in the state WI DNR database. Half fall between 185 ft and 302 ft; 90% are shallower than 400 ft.
How much does it cost to drill a well in and around Little Chute (54140)?
Applying published per-foot rates to the local median depth of 282 ft: drilling and casing alone typically runs $7,050–$18,330; a complete system including pump, pressure tank, and hookup typically runs $16,920–$28,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Little Chute (54140)?
The median static water level is 90 ft below ground surface (middle half of wells: 40 ft–125 ft), from 165 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Outagamie County.
Part of Outagamie County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.