⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Oconto County › Mountain (54149)

Mountain, WI (54149): well depth, water level & drilling cost

✓ 1,588 WI DNR records · Oconto County

84 ftmedian well depth
58 ft–222 fttypical depth range
20 ftmedian static water level
10 gpmmedian yield (1,289 tests)

Pull every recorded well near a Mountain (54149) address — $49

How deep are wells in and around Mountain (54149), Wisconsin?

The median drilled well depth in and around Mountain (54149) is 84 ft, based on 1,292 wells with recorded depths in the state WI DNR database. Half fall between 58 ft and 222 ft; 90% are shallower than 261 ft.

How much does it cost to drill a well in and around Mountain (54149)?

Applying published per-foot rates to the local median depth of 99 ft: drilling and casing alone typically runs $2,475–$6,435; a complete system including pump, pressure tank, and hookup typically runs $5,940–$9,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mountain (54149)?

The median static water level is 20 ft below ground surface (middle half of wells: 11 ft–32 ft), from 1,298 measurements.

Drilled depth distribution

0–50 ft 237 50–100 ft 472 100–150 ft 153 150–200 ft 64 200–300 ft 322 300–400 ft 42 400–600 ft 1 600+ ft 1
Looking at a specific property in Mountain (54149)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mountain (54149)

Free. Goes to licensed drillers working Oconto County.

Part of Oconto County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.